한빛사논문
한국생명공학연구원, 성균관대학교, UST
Jin-Ho Yun a,b,c, Jang-Won Nam a,c, Jin Hoon Yang d, Yong Jae Lee a,c, Dae-Hyun Cho a, Hong Il Choi a, Joung Sook Hong d, Kyung Hyun Ahn d, Hee-Sik Kim a,c
aCell Factory Research Center, Korea Research Institute of Bioscience and Biotechnology (KRIBB), Daejeon 34141, Republic of Korea
bDepartment of Integrative Biotechnology, Sungkyunkwan University, Suwon, Gyeonggi-do 16419, Republic of Korea
cDepartment of Environmental Biotechnology, University of Science and Technology, Daejeon 34141, Republic of Korea
dSchool of Chemical and Biological Engineering, Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea
Corresponding author : Joung Sook Hong
Abstract
The concept of circular biorefinery has been promoted as a sustainable new approach for the nascent microalgae industry. In particular, solvent extraction of the lipid fraction of microalgal biomass is generally performed when aiming to recover marketable compounds from microalgae; the waste residual biomass generated by this process can provide new market opportunities for microalgae in a wide array of commercial sectors. Herein, the heterotrophic cultivation of Chlorella sp. HS2 was demonstrated using a hydrolysate recovered following the dilute acid hydrolysis of defatted Chlorella biomass (DCB). While HCl and H2SO4 in each case was found to be an effective catalyst capable of converting nearly 40% of DCB into fermentable monosugars, the results of microalgal cultivation in diluted hydrolysate indicated high cellular growth without the need for any supplemental nutrients. Notably, the highest microalgal growth was observed when neutralizing HCl- and H2SO4-treated hydrolysates with NaOH and Ca(OH)2, respectively. Furthermore, the fabrication of a polymer/residual composite using the residual material obtained after H2SO4-catalyzed hydrolysis and Ca(OH)2 neutralization suggested improved tensile capabilities, attributed to the improved dispersion of salt precipitates-containing residue in the hydrophobic polymer matrices. Considering that the leftover residual DCB could be better conditioned as an organic–inorganic filler for composite fabrication through a combined acid hydrolysis-neutralization process, the results here suggest new integrated utilization routes for underutilized byproducts from the microalgal industry. Further investigations are thus warranted with a special focus on bolstering the economic feasibility and scalability of the postulated zero-waste microalgal biorefinery.
논문정보
관련 링크
연구자 키워드
연구자 ID
관련분야 연구자보기
소속기관 논문보기
관련분야 논문보기
해당논문 저자보기