연구·분석용 Labware & 실험장비/액세서리 혜택적용 제품 Benchmark 31-212TP10 / Sartorius 60-330 | 할인행사 > Bio마켓

파머컴퍼니

등록2026.05.07
조회60

가격할인

행사기간 ~2026.06.30까지

연구·분석용 Labware & 실험장비/액세서리 혜택적용 제품 Benchmark 31-212TP10 / Sartorius 60-330

이메일 info@parma.kr
연락처 02-1544-9887

[파머컴퍼니]





[연구·분석용 Labware & 실험장비/액세서리 혜택적용 제품]
1.0mm TriplePure Zirconium Beads
Benchmark Scientific
31-212TP10
Bulk Beads, 250gm/Unit
(1.0mm 비드밀·세포파쇄용 지르코늄 비드)
1.0mm diameter zirconium beads
Ideal for use with the BeadBugTM homogenizer

Arium® Mini Essential Starter Set
Sartorius
60-330
Sartorius, 1 Set/Unit
(초순수 제조 시스템용 스타터 세트)
For easy start-up process
The set was put together for a simple and uncomplicated initial start-up and contains the system with all the required components, e.g. filters

Application Blood and Plasma Vaccine Production
Bacterial Retention Quantitative Retention of 1 × E7 CFU/cm² Brevundimonas Diminuta ATCC® 19146 per ASTM methodology
Bacterial Endotoxins < 0.25 EU/mL as determined by the LAL test
Biological Reactivity All materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
Extractables The total amount of extractables is well below the limits established by the current USP unter "Sterile Water for Injection".
Connector Inlet 1/2" Single Stepped Hose Barb
Connector Outlet 1/2" Single Stepped Hose Barb
Filter Size 30"(1.8 m² / 19.4 ft²)
Filtration Area 1.8 m² / 19.4 ft²
Outer Diameter 137 mm (110 mm without Connection / Valves)
Capsule/cartridge Format Maxicaps®
Maximum Allowable Back Pressure 2 bar (29 psi) at 20°C 1.5 bar (21.8 psi) at 50°C
Maximum Diffusion 45 mL/min at 2.5 bar | 36 psi
Minimum Required Bubble Point 3.2 bar | 46 psi
Vent Valve Standard
Filter Material Cellulose Acetate (CA)
Housing Material Polypropylene (PP)
Material O-ring | Seal Silicone (SI)
Support Fleece Polypropylene (PP)
Maximum Differential Pressure 20 °C: 5 bar; 50 °C: 3 bar
Maximum Operating Pressure 5 bar (72.5 psi)
Non-fiber Releasing This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
Pore Size Final-filter 0.2 µm
Pore Size Pre-filter 0.45 µm
Brand Sartobran® P
Sterilization Method Autoclavable
Sterilization Procedures Autoclaving: at 134°C, 30 min, 2 bar, min. 25 Cycles

바이오시약 과학기자재 연구·분석용 장비 Labware 중고기기

본 정보는 "파머컴퍼니"(으)로 문의 바랍니다.

할인행사 > 파머컴퍼니

기업정보 바로가기 >

Application	Blood and Plasma Vaccine Production
Bacterial Retention	Quantitative Retention of 1 × E7 CFU/cm² Brevundimonas Diminuta ATCC® 19146 per ASTM methodology
Bacterial Endotoxins	< 0.25 EU/mL as determined by the LAL test
Biological Reactivity	All materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
Extractables	The total amount of extractables is well below the limits established by the current USP unter "Sterile Water for Injection".
Connector Inlet	1/2" Single Stepped Hose Barb
Connector Outlet	1/2" Single Stepped Hose Barb
Filter Size	30"(1.8 m² / 19.4 ft²)
Filtration Area	1.8 m² / 19.4 ft²
Outer Diameter	137 mm (110 mm without Connection / Valves)
Capsule/cartridge Format	Maxicaps®
Maximum Allowable Back Pressure	2 bar (29 psi) at 20°C 1.5 bar (21.8 psi) at 50°C
Maximum Diffusion	45 mL/min at 2.5 bar \| 36 psi
Minimum Required Bubble Point	3.2 bar \| 46 psi
Vent Valve	Standard
Filter Material	Cellulose Acetate (CA)
Housing Material	Polypropylene (PP)
Material O-ring \| Seal	Silicone (SI)
Support Fleece	Polypropylene (PP)
Maximum Differential Pressure	20 °C: 5 bar; 50 °C: 3 bar
Maximum Operating Pressure	5 bar (72.5 psi)
Non-fiber Releasing	This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
Pore Size Final-filter	0.2 µm
Pore Size Pre-filter	0.45 µm
Brand	Sartobran® P
Sterilization Method	Autoclavable
Sterilization Procedures	Autoclaving: at 134°C, 30 min, 2 bar, min. 25 Cycles